2G DSM Rear Differential Cover

Are you tired of cracking your stock differential cover on your 2g or worse yet, breaking it into pieces and destroying lots of expensive drivetrain parts in the process? These replacement differential covers are fabricated out of 1/4" steel so you'll never have to worry about breakage again!

The girdled option adds two through-style load bolts that put pressure on the tops of the bearing caps in the rear end, thus keeping them from deflecting and possibly causing rear end failure. V8 guys have been using this tried and true method for years. Slight modifications are necessary to run these load bolts. Two holes must be drilled through the subframe to allow the load bolts to slip through.

Also available is the 1g version which incorporates the load bolt design. Make your 4-bolt rear end even more bulletproof!

Features

• All TIG welded construction (1/4" steel)
• Bolts up like factory
• Integrated breather
• NPT-style fill plug
• Comes powder coated in two standard colors: Wrinkle Black or Almost Chrome

Options

• Non-Girdled
• Girdled using two 1/2" swivel-foot load bolts (must drill two holes in subframe for installation)

Specs

• Designed for the 95-99 Mitsubishi Eclipse and Eagle Talon.

Notes

Recommended torque on the load bolts is 5 lb/ft, and threat sealant is recommended on them as well

Built to order. Allow one week for build time per order.